GoodWe GW10000-ET 10kW Hybrid Solar Inverter – Grid-Tied Battery Ready – GoodWe GW10000-ET 10kW hybrid solar inverter

GoodWe GW10000-ET 10kW Hybrid Solar Inverter

The GoodWe GW10000-ET 10kW hybrid solar inverter sits at the center of a modern residential solar and battery storage system, converting DC energy from your rooftop array into grid-compliant AC power while simultaneously managing charge and discharge cycles for connected battery storage. It is designed for homeowners and installers who want a single device that handles self-consumption, grid export, and backup power without needing a separate battery inverter bolted onto the system. Peak Power Output: The GW10000-ET is rated for a nominal AC output of 10,000W (10kW), making it suitable for mid-to-large residential installations with daytime household loads in the 6kW to 10kW range. The unit is designed to accept an oversized DC solar array, typically in the 12kW to 13kW range, allowing it to keep producing near its rated output for more hours per day, even during cloudy conditions or off-peak sun angles. Max Efficiency Rating: This inverter is engineered for a maximum conversion efficiency of up to 97.6 percent, meaning very little energy is lost as your solar and battery power is converted and routed to your home or the grid. High conversion efficiency translates directly into more usable kilowatt-hours reaching your appliances and a faster payback period on your solar investment, rather than that energy being wasted as heat inside the inverter housing. Inverter Technology: The GW10000-ET uses a GoodWe GW10000-ET 10kW hybrid solar inverter, dual independent MPPT (Maximum Power Point Tracking) design, which allows the system to track and optimize two separate strings of solar panels independently, even if they face different roof orientations or experience partial shading at different times of day. This dual-tracker architecture makes it compatible with a wide range of monocrystalline and N-Type TOPCon solar panels on the market, so you are not locked into a single panel brand or cell technology when designing your array. Build Quality, Certification and Weather Protection Inverter Compatibility: The GW10000-ET is engineered to work with most mainstream monocrystalline and N-Type GoodWe GW10000-ET 10kW hybrid solar inverter solar panels available today, and it pairs directly with GoodWe’s own low-voltage 48V Lynx battery modules as well as many third-party lithium battery packs that support standard BMS communication protocols. This flexibility means the inverter can anchor a new solar-plus-storage build or slot into an existing system without forcing a full battery replacement.

Flash Test Batch Certification: Every GoodWe GW10000-ET 10kW hybrid solar inverter unit that leaves the factory is subjected to a 100 percent full-load burn-in and flash test before packaging, verifying real-world output, MPPT tracking accuracy, and thermal performance against the manufacturer’s published datasheet figures. Units are batch-coded so that any quality issue traced back to a specific production run can be identified and addressed quickly, giving buyers a documented chain of quality assurance rather than a blind purchase. Weather Degradation Rating: The enclosure carries an IP66 ingress protection rating, meaning it is fully protected against dust ingress and can withstand powerful water jets from any direction, making it suitable for both indoor and sheltered outdoor mounting in most residential climates. This rating is a key factor in long-term reliability, since moisture and dust intrusion are among the leading causes of premature inverter failure in the field. Frame Durability: The housing is built from a corrosion-resistant, die-cast aluminum alloy shell designed to dissipate heat efficiently while protecting the internal power electronics from physical impact, vibration, and thermal cycling over years of continuous operation. This rugged enclosure is a major reason GoodWe GW10000-ET 10kW hybrid solar inverter hybrid inverters are widely specified for both residential rooftops and detached garage or utility-room installations. Weather-Seal Protection: All external cable glands, DC input terminals, and communication ports are sealed with weather-resistant gaskets that prevent water and dust intrusion at every connection point, not just the main housing. Combined with the IP66-rated enclosure, this sealing approach is what allows the GW10000-ET to be installed in exposed outdoor locations without a separate protective cabinet in most residential climates. Insured Shipping, Delivery and Damage Protection Insured Freight Delivery: Every GoodWe GW10000-ET 10kW hybrid solar inverter shipped from Prime Solar is covered by full freight insurance for the declared value of the unit, so in the rare event of transit loss, the replacement cost is covered without out-of-pocket expense to you. This is especially important for a device of this size and value, where standard uninsured parcel shipping would leave buyers exposed to significant financial risk. Signature on Delivery: Because of the unit’s value and the sensitivity of its internal electronics, this product ships with a mandatory signature-on-delivery requirement, ensuring the package is handed directly to an authorized recipient rather than left unattended at a doorstep or loading dock. We recommend having someone available at the delivery address on the scheduled date, or arranging pickup at a staffed freight terminal if daytime access is limited. Pre-Shipment Inspection Checks: Before any GW10000-ET leaves our warehouse, it undergoes a visual and functional pre-shipment inspection covering enclosure integrity, terminal and connector condition, packaging seal integrity, and confirmation that all included accessories and documentation are present. This inspection step is logged against the unit’s serial number, adding another layer of accountability on top of the factory’s own flash test certification. Shipping Damage Claim Process: If your unit arrives with visible carton damage, photograph the packaging and the product before opening further, and contact our support team within 48 hours of delivery to open a freight damage claim. Keep all original packaging and paperwork until the claim is resolved, as the freight insurer may require the damaged unit and materials for inspection before approving a replacement or refund. Browse the rest of our hybrid inverters, battery storage, and complete solar panel kits in the Prime Solar collection to build out a matched system: https://primesolar.shop/product-category/solar-panel-kits/

Frequently Asked Questions

GoodWe GW10000-ET 10kW hybrid solar inverter

shop now

Federal solar tax credit guide

dual MPPT inverter

GoodWe GW10000-ET 10kW Hybrid Solar Inverter – Grid-Tied Battery Ready